JKLM Non-electric Automatic Softener
1.Driven by water pressure, it’s automatic system, no power supply, energy saving and avoiding safety hazards of electrical equipment.Especially suitable for softening systems with explosion-proof requirements.
2.Packed Bed working process, large water production, high softening efficiency.
3. Counter-current regeneration process, high regeneration efficiency, water and salt saving.
4.The regeneration will be triggered by the water production,is currently the most practical endpoint control.
5.Multiple configurations: Q: Single Softener Valve with bypass; E: Multiple Softeners in parallel, Sequential regeneration.
6.The double safety design of the brine valve prevents water overflow from brine tank.
7.The regeneration also can be stared by manual.
8.Simple and practical, no need complicated debugging or setting procedures.
Inlet Pressure:0.2～0.8MPa
Working Temperature:2～40℃
Outlet Pressure:≥0.15MPa
Weight: 1.8 kg
Brine in: 3/8"
Drain: 5/8"
Material: PPO+GF
Connection: 2.5"NPSM
In/Out: G1"or G3/4"BSPT
Distributor Tube: OD 26.7/32mm
Size: L×W×H 240×210×176mm
| L Non-Electric Automatic Softener Valve Datasheet |
| Model |
| Tank |
| Service Flow（m³/h） |
| Resin（L） |
| Water production/regen cycle(Regen Point) |
| Salt(g/mol) |
| Saturated Brine/regeneration(L) |
| Salt/regeneration(kg) |
| Regeneration Time (min) |
| L Non-Electric Automatic Softener System |
| L Non-Electric Automatic Softener System BOM |
| Series |
| Model |
| Service Flow（m³/h） |
| Control valve |
| Model Unit Qty |
| FRP Tank |
| Specification |
| Brine Tank PE |
| Brine Valve PVC |
| Resin |
| Resin Filling (L) |
| Qty(set) |
| Total Volume(L) |
| Single Tank-with bypass |
| Single Tank-without bypass |
| Multiple Softeners in parallel,Sequential regeneration |
| Notes: 1.Please mark it if the tank size is different with the datasheet. 2.Default resin is ZhengGuang C100E,please mark it if you need other type resin. 3.We recommend E system with Multiple Softeners. |